Synology RS214 Guide d'installation télécharger pdf (Page 6)

Chapter

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation

 A screwdriver

 At least one 3.5” or 2.5” SATA hard disk

(Please visit www.synology.com for compatible hard disk models.)

Warning: If you install a hard disk that contains data, the system will format the hard disk and erase all data. If you

need the data in the future, please back it up before installation.

Install Hard Disks

1 Insert the hard drive tray key into the hard drive tray lock, turn the key counter-clockwise to unlock the handle

of the hard drive tray, and then remove the key.

2 Press the lower part of the hard drive tray to pop out the handle.

3 Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray.

4 Place the hard disk in the hard drive tray, turn the tray upside down, and then tighten the screws to secure the

hard disk.

 For 3.5" Hard Disk:

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Pas de commentaire

Synology RS214 Guide d'installation Page 6