Synology DS1812 + 8x 2TB Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour NAS et serveurs de stockage Synology DS1812 + 8x 2TB. Synology DS1812 + 8x 2TB Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer

Résumé du contenu

Page 1 - Synology_QIG_18Bay_20111116

Synology DiskStation DS1812+ Quick Installation Guide Synology_QIG_18Bay_20111116

Page 2 - Table of Contents

10 Chapter 2: Hardware Setup 2 Remove the 6 screws that secure the top case. Lift off the case and place it to the side. Important: When y

Page 3 - Before You Start

11 Chapter 2: Hardware Setup 3 Check Total Physical Memory in Main Menu > System Information. If your DiskStation does not recognize th

Page 4

12 Chapter 2: Hardware Setup 2 Remove the 4 screws that secure the fan panel. 3 Remove the malfunctioning fan: a Pull the fan panel from

Page 5 - Safety Instructions

13 Chapter 2: Hardware Setup 4 Install the new fan: a Replace the malfunctioning fan with a good one (with the fan cable within the fan po

Page 6 - Hardware Setup

14 Chapter 3 Chapter 3: Install DSM on DiskStation On a network computer, follow the steps in this chapter to install DSM on your DiskStation.

Page 7

15 Chapter 3: Install DSM on DiskStation 3 Click Browse to locate the DSM_[model name]_[number].pat installation file in the DSM folder of

Page 8

16 Chapter 3: Install DSM on DiskStation Install from Mac OS X 1 Insert the installation disc into your computer, and then double-click the

Page 9 - Start Up Your DiskStation

17 Chapter 3: Install DSM on DiskStation 5 To run Synology Assistant, you can either use the following command: /path/install/SynologyAssis

Page 10

18 Chapter 3: Install DSM on DiskStation Important: If you are using 64bit Ubuntu, you have to install the 32bit libraries before proceeding

Page 11 - Replace System Fan

19 Chapter 3: Install DSM on DiskStation

Page 12

2 Table of Contents Chapter 1: Before You Start Package Contents ...

Page 13

20 Appendix A Appendix A: Specifications Item DS1812+ Internal HDD 3.5" or 2.5" SATA (II) x 8 Max. Capacity ‧24TB (8x 3TB hard dri

Page 14 - Install DSM on DiskStation

21 Appendix A: Specifications Item DS1812+ Power Consumption And Environment Requirements ‧Line voltage: 100V to 240V AC ‧Frequency: 50/60Hz

Page 15

22 Appendix B Appendix B: LED Indication Table LED Indication Color Status Description STATUS Green Static Volume Normal Off HDD Hibernat

Page 16 - Install from Linux

SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEE

Page 17 - 3.2-1944

INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGE

Page 18 - Learn More

SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AN

Page 19

Product specifications and such failure is attributable to causes not within or under Synology's control. Further, the foregoing warranties wi

Page 20 - Specifications

proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. Customer understan

Page 21

3 Chapter 1 Chapter 1: Before You Start Before you start setting up DiskStation, please check the package contents to verify that you have rec

Page 22 - LED Indication Table

4 Chapter 1: Before You Start Synology DiskStation at a Glance No. Article Name Location Description 1) Power Button Front Panel The po

Page 23 - END USER LICENSE AGREEMENT

5 Chapter 1: Before You Start Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does no

Page 24

6 Chapter 2 Chapter 2: Hardware Setup Tools and Parts for Hard Disk Installation  A screwdriver  At least one 3.5" or 2.5" SATA

Page 25 - LIMITED PRODUCT WARRANTY

7 Chapter 2: Hardware Setup 3 Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray. 4 Load t

Page 26

8 Chapter 2: Hardware Setup Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function p

Page 27

9 Chapter 2: Hardware Setup Start Up Your DiskStation 1 Use the LAN cable to connect DiskStation to your switch/router/hub. 2 Connect one

Commentaires sur ces manuels

Pas de commentaire