Synology DS3615XS Guide d'installation télécharger pdf (Page 15)

Chapter 2: Hardware Setup

Install the network interface card.

Pull the tab on the port access bracket to the right so as to remove the cover.

Align the card’s connector with the expansion slot.

Insert the card into the slot.

Push back the tab to secure the newly inserted card.

Note:

Make sure the connector is fully inserted. Otherwise, the network interface card might not be able to function

properly.

Replace the top cover, and then replace and tighten the 2 screws you removed in step 2.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Pas de commentaire

Synology DS3615XS Guide d'installation Page 15