Synology DiskStation DS1815+ Guide d'installation télécharger pdf (Page 8)

Chapter 2: Hardware Setup

Insert the loaded hard drive tray into the empty hard drive bay.

Note:

Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.

Press the handle in ush with the front panel to hold the hard drive tray in place.

Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the "I" position) to lock the

handle of the hard drive tray, and then remove the key.

Repeat the steps above to assemble the other drives you have prepared.

Drives are numbered as shown below.

Note:

If you want to create a RAID volume, we recommended that all installed drives are of the same size to make the

best use of drive capacity.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Pas de commentaire

Synology DiskStation DS1815+ Guide d'installation Page 8