Synology DS2415+ Guide d'installation télécharger pdf (Page 7)

Chapter 2: Hardware Setup

Load drives in the drive trays.

•

For 3.5” drives:

Remove the fastening panels from the sides of the drive tray. Place the drive in the drive

tray. Then insert the fastening panels to secure the drive in place.

•

For 2.5” drives:

Remove the fastening panels from the sides of the drive tray and store them in a safe

place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and tighten

the screws to secure the drive in place.

Insert the loaded drive tray into the empty drive bay.

Note:

Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.

Pressthehandleinushwiththefrontpaneltoholdthedrivetrayinplace.

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Pas de commentaire

Synology DS2415+ Guide d'installation Page 7